How to deal with the early erosion of reducer
The formation of point erosion is the biggest hazard to the reducer, which causes the decelerator's failure to function normally. Therefore, the enterprise should pay special attention to the formation of the early point erosion of the reducer during the use of the reducer.The staff of the JIAYOU REDUCER made the following analysis
1.In the process of speed reducer gear overhaul back pack, strictly implement maintenance procedure, to ensure each gear installed, remove the contact parts of material at the same time, adjust good gear axial clearance, to ensure that the gear tooth contact area, improve the accuracy of speed reducer gear contact.
2.Reducer gear lubricant, should strictly according to the required type reducer itself lubricants for lubrication, prohibited to use different types of lubricant blending, at the same time guarantee the quality of lubricant, outstanding for metamorphism of lubricant is strictly prohibited.
3.Reducer gear strictly enforce standards on material selection, can't choose those unqualified material quality, at the same time in the process of gear heat treatment, for those who are not qualified gear products, resolutely give fall into disuse.
4.In early use process in addition to pay attention to the various items of from time to time to cleaning of reducer, gear box of gear case of machine cleaning maintenance using the original to the discharge of oil system and the filtered oil to wash of gear box, not any hardware change gear box, do not add any detergent, ensure the safety of the gear box operation, prolong the service life of the gear box. It can guarantee the normal operation of the reducer.
Copyright © 2018 JiangYin JiaYou Reducer Co., Ltd. All rights reserved.